Complete civil packages for utility solar near Newfield, NY: clearing, mass grading, access roads, collection trenching, SWPPP, fencing, and substation civil.
Backwell contracts complete civil site work packages for utility solar EPCs building near Newfield in Tompkins County, New York. One contract covers clearing through final stabilization, with Backwell field leadership on site.
NY 13 south of Ithaca in steep valley terrain, with valley gravel pits for borrow and subbase and short but demanding haul grades on the town roads.
Publicly reported utility-scale solar in and around Tompkins County:
Project details come from public filings and reporting and are listed to show where the work is. Backwell is not affiliated with these projects or their developers.
The Cayuga Lake trough dominates, a glacial trench several hundred feet deep with hanging tributary valleys that end in gorges at Taughannock, Buttermilk, Enfield and Fall Creek. Uplands on both sides are till plains at 1,200 to 1,800 feet over soft, thin bedded Devonian shale and siltstone that sits close to the surface on the shoulders. Lansing, Conesus and Honeoye soils cover the calcareous till on the north and east; Mardin, Volusia, Erie and Langford fragipan soils the wetter uplands; Hudson and Rhinebeck lacustrine silty clay the lower lake slopes; and Howard, Palmyra and Chenango gravels the valley floors at Ithaca and along Fall Creek. Salina Group salt beds lie deep beneath the lake at Lansing.
Erosion control is the highest risk item on this ground. Slopes into the gorges are short and steep, the shale weathers to a silt that stays in suspension for a long time, and several tributaries to Cayuga Lake carry impairment listings, so expect tight sediment limits, aggressive stabilization schedules and close inspection. Shale within a few feet of grade means rock in ridge trenching, though it usually rips rather than needing blast. Fragipan uplands perch water and rut under haul traffic, so underdrain and stone the routes. Lacustrine clay on the lake slopes is unstable in cut and will slump, so keep cuts shallow, bench them, and drain behind the face rather than letting water build in the backslope.
Full detail on the Tompkins County market is on the Tompkins County solar civil page.
We price the package as one scope under one contract, so the EPC has a single point of responsibility for the civil critical path instead of managing separate clearing, earthwork, and utility subcontracts.
Backwell superintendents, project managers, and lead operators run every site. We mobilize company equipment for the core scope and scale each project with leased production fleets, qualified regional subcontractors, and agency-placed field staff, all under Backwell supervision and a single contract.
Contractor licensing. New York does not issue a statewide general contractor license for commercial construction. Licensing is handled locally, so individual cities, towns, and counties may require contractor registration or a local license, and a few trades are licensed at the state level, including asbestos handling and crane operation. Separately, contractors and subcontractors performing public work, and work covered by the renewable energy prevailing wage statute, must be registered with the New York State Department of Labor under its statewide contractor registry, which took effect December 30, 2024. Owners and EPCs on solar projects will typically ask for that DOL registration number along with insurance and, where required, bonding.
Construction stormwater. SPDES General Permit for Stormwater Discharges from Construction Activity, permit number GP-0-25-001, issued by the New York State Department of Environmental Conservation. It took effect January 29, 2025, replacing GP-0-20-001, and runs through January 28, 2030. Coverage is triggered at one acre of soil disturbance, or less if part of a larger common plan, and requires a Notice of Intent plus a SWPPP prepared and implemented under the DEC design manual. Coverage under the prior permit did not carry over automatically, so active sites had to refile. Backwell carries the SWPPP scope, installs and maintains the controls, keeps the inspection log, and closes the permit out with final stabilization.
Prevailing wage. Federal Davis-Bacon prevailing wage and apprenticeship requirements apply through the Inflation Reduction Act to projects of 1 MW AC and larger that claim the full investment or production tax credit, so nearly every utility-scale solar job in New York is certified payroll work. On top of that, New York State has its own requirement: Labor Law Article 8 Section 224-d extends state prevailing wage, or a project labor agreement in lieu of it, to covered renewable energy systems, which New York State Department of Labor enforcement guidance applies to solar projects of 1 MW AC and larger that involve procurement of renewable energy credits by a public entity or a third party acting on its behalf. Because most large New York solar projects sell renewable energy credits to NYSERDA, 224-d is the practical baseline, and state certified payroll plus NYSDOL contractor registration come with it. A separate threshold of greater than five megawatts AC applies to other covered renewable energy systems, so the applicable trigger should be confirmed project by project. For projects claiming the full ITC or PTC, Backwell produces Davis-Bacon certified payroll, pays the applicable wage determination, and supports apprenticeship labor-hour compliance.
All New York solar civil work or the national utility solar civil page.
Send plans, a scope of work, and the schedule through the form below or call (315) 400-2654. We review the civil package, walk the site if it is at that stage, and return a scoped proposal with a schedule of values, stated fill allowances, and unit rates for overages. A one-page capability statement is available for prequalification files.
Plans, scope, and schedule reviewed and answered promptly.
Reply in hours, not days.