Complete civil packages for battery energy storage near Hamburg, NY: pad subgrade and mass grading, foundation excavation, access and crane pads, collection trenching, ductbank, SWPPP, and substation civil.
Backwell contracts complete civil site work packages for battery energy storage developers and EPCs building near Hamburg in Erie County, New York. One contract covers site preparation through final stabilization, with Backwell field leadership on site.
Hamburg hosts KCE NY6, the Key Capture Energy system rated 20 MW and 45.6 MWh at Blasdell and in the Town of Hamburg, connected on the Gardenville to Bethlehem Steel Wind 115 kV Line 150 under NYISO queue position 0759. It is the earliest operating utility scale battery in Erie County and the template for distribution and sub transmission connected storage in the lake plain suburbs. Access is by Route 5, NY-179 Milestrip Road, and I-90 exits 56 and 57. The northern half of town is lake plain clay with a high water table, rising southeast toward Boston Hills onto till with fragipans.
Publicly reported battery energy storage in and around Erie County:
Project details come from public filings and reporting and are listed to show where the work is. Backwell is not affiliated with these projects or their developers.
Erie County splits into two physiographic halves. North and west of a line roughly along Route 20 lies the Erie lake plain, a nearly level glaciolacustrine surface of silt and clay carrying Niagara, Rhinebeck, Odessa, and Canandaigua series soils, with Hamlin and related silt loams on the stream terraces. These are somewhat poorly to poorly drained, slow to shed water, and highly plastic when wet. South and east the ground rises onto the glaciated Allegheny Plateau, where dense till soils of the Langford, Erie, Volusia, and Mardin series carry fragipans commonly in the 18 to 40 inch range, perching water above the dense layer. Valley trains along Cattaraugus, Cazenovia, and Buffalo creeks carry Chenango and other gravelly outwash. Bedrock is Devonian shale and limestone, shallow along the Onondaga Escarpment through Buffalo and the eastern towns and deeper under the lake plain. Seasonal high water tables sit near the surface on the plain, and design frost depth in the county is commonly taken at 42 inches or more.
On the lake plain, battery enclosure pads and inverter foundations sit on low strength silt and clay with a high seasonal water table, so undercut and replace with imported crushed stone, geotextile separation, and a stone working platform are the normal approach rather than compacting native material in place. Wet weather shuts down clay subgrade work quickly, which pushes mass grading into the drier months and puts a premium on temporary haul road stone. Trenching for DC and AC collection is easy digging but needs dewatering, trench box support, and select bedding because the native clay will not drain. On the southern upland sites the fragipan perches groundwater, so subsurface drainage and outlet routing carry the design, and shallow shale can turn foundation excavation and deeper trench runs into hammer or rock saw work. Stormwater design under the SPDES general permit leans on infiltration only where outwash gravels are present.
Full detail on the Erie County market is on the Erie County battery storage civil page.
Concrete is placed by our subcontractor partners under the same contract, so the foundations follow the earthwork without a separate award. We price the civil package as one scope under one contract, which gives the EPC a single point of responsibility for the civil critical path instead of managing separate clearing, earthwork, and underground subcontracts.
Battery storage in New York is governed by Section 1207 of the 2025 Fire Code of New York State, which the State Fire Prevention and Building Code Council adopted on July 25, 2025 with an effective date of December 31, 2025. Section 1207 carries material based on the 2023 edition of NFPA 855 and renumbers what the 2020 code placed at Section 1206. Systems must be listed to UL 9540. Large scale fire testing under UL 9540A, reported to and approved by the fire code official, is what permits reduced separation distances and quantities above the table limits, and a hazard mitigation analysis is required to exceed the maximum allowable quantity. Outdoor installations carry a ten foot clearance to lot lines, public ways, buildings, stored combustibles, and other exposure hazards, with ten feet of combustible vegetation cleared on each side. New York added a mandatory peer review at Section 1207.12 for systems above the Table 1207.5 quantities, covering the site plan, the emergency operations plan, and the UL 9540A report. Those provisions fix pad layout and access road geometry before any earthwork is priced.
Battery storage siting in New York runs on the Fire Code of New York State, which adopts the International Fire Code provisions for stationary energy storage, together with NFPA 855 and the UL 9540A test reporting the authority having jurisdiction will ask for. The civil consequences are set early and they are ours to build.
We build to the approved civil drawings and the fire code commentary that comes with the permit. We do not stamp the design.
Local law. As of September 2026 the towns of Eden, Concord, Collins, Aurora, and Boston carry active battery storage moratoria, with Boston extended to December 2026, while the Newstead moratorium has expired. Grand Island was still taking public comment on a proposed battery storage law in May 2026 and had not adopted one. Sources: https://carina.energy/bess-moratoriums/new-york/ and https://www.wnypapers.com/news/article/featured/2026/05/22/166172/grand-island-pros-and-cons-heard-on-battery-storage-law
Backwell superintendents, project managers, and lead operators run every site. We mobilize company equipment for the core scope and scale each project with leased production fleets, qualified regional subcontractors, and agency-placed field staff, all under Backwell supervision and a single contract.
Contractor licensing. New York does not issue a statewide general contractor license for commercial construction. Licensing is handled locally, so individual cities, towns, and counties may require contractor registration or a local license, and a few trades are licensed at the state level, including asbestos handling and crane operation. Separately, contractors and subcontractors performing public work, and work covered by Article 8 of the Labor Law, must be registered with the New York State Department of Labor under its statewide contractor registry, which took effect December 30, 2024. Owners, EPCs, and integrators on battery storage projects will typically ask for that DOL registration number along with insurance and, where required, bonding.
Construction stormwater. SPDES General Permit for Stormwater Discharges from Construction Activity, permit number GP-0-25-001, issued by the New York State Department of Environmental Conservation. It took effect January 29, 2025, replacing GP-0-20-001, and runs through January 28, 2030. Coverage is triggered at one acre of soil disturbance, or less if part of a larger common plan, and requires a Notice of Intent plus a SWPPP prepared and implemented under the DEC design manual. Coverage under the prior permit did not carry over automatically, so active sites had to refile. Backwell carries the SWPPP scope, installs and maintains the controls, keeps the inspection log, and closes the permit out with final stabilization.
Prevailing wage. Standalone battery storage sits outside New York Labor Law Section 224-d. That section applies to a covered renewable energy system as defined in Public Service Law Section 66-p, and that definition lists generating technologies only, so energy storage is not included and Section 224-d contains no storage clause. Prevailing wage still reaches many storage projects by other routes. Labor Law Section 224-a expressly excludes an energy storage system with a capacity equal to or under five megawatts alternating current, which means a larger storage system on a privately contracted project that meets the public funds and cost tests can be covered. The Public Service Commission order of June 20, 2024 establishing the updated energy storage goal states that projects of one megawatt alternating current and larger will be subject to prevailing wage requirements, so incentivized projects carry it as a program condition rather than by statute. Storage co-located with a covered renewable generator follows that generator. Separately, contractors and subcontractors performing public work, and work covered by Article 8 of the Labor Law, must be registered with the New York State Department of Labor under the statewide contractor registry effective December 30, 2024. The applicable trigger should be confirmed project by project. Backwell produces certified payroll, pays the applicable wage determination, and supports apprenticeship labor-hour compliance.
All New York battery storage civil work or the New York solar civil cluster.
Send plans, a scope of work, and the schedule through the form below or call (315) 400-2654. We review the civil package, walk the site if it is at that stage, and return a scoped proposal with a schedule of values, stated fill allowances, and unit rates for overages. A one-page capability statement is available for prequalification files.
Plans, scope, and schedule reviewed and answered promptly.
Reply in hours, not days.